Login / Register
Sanha NiroSan Press Fit Female x Plain Male Bend 90
Useful Information
What is a Press Fit Female x Plain Male Bend 90° used for?
The Sanha NiroSan Press Fit Female x Plain Male Bend 90° is engineered for seamless directional changes in press-fit piping systems. The female press-fit end connects to a male plain end at a 90-degree angle, facilitating right-angle turns in the piping layout. This fitting is essential for installations where spatial constraints require pipes to navigate corners or connect with different system components efficiently.
Key Features
- Material Quality: Made from high-grade 1.4404 stainless steel for moulded parts and 1.4408 for threaded parts, ensuring superior corrosion resistance compared to conventional materials.
- Durability: Features a long service life, supported by an EPDM sealing ring known for its robustness and reliability.
- Certifications: WRAS-tested and certified, ensuring compliance with rigorous health and safety standards.
- Temperature and Pressure Ratings: Capable of handling a broad range of operating temperatures (-30 °C to +120 °C) and pressures, varying according to size (up to 40 bar for smaller diameters).
- Broad Application Spectrum: Suitable for a multitude of systems, from potable water to technical gases and cooling systems, reflecting its versatility in different industrial and commercial settings.
- Certifications: WRAS-certified, ensuring it meets the standards required for safe use in potable water systems.
Specifications
- Product Codes: 69001A15, 69001A22, 69001A28, 69001A35, 69001A42, 69001A54
- Available Sizes: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm
- Pressing Profile: SA, M and V Profile
- Materials: 1.4404 (AISI 316L) stainless steel
- Sealing Ring: EPDM
- Operating Conditions: Varies with diameter - up to 40 bar for ≤22 mm, 25 bar for 28–35 mm, and 16 bar for 42–168.3 mm.
- Temperature Range: -30 °C to +120 °C
- Range: NiroSan Series 9000
- Approvals: BSI / Kitemark & WRAS
Product Code | Sanha Code | Diameter (mm) | A (mm) | B (mm) | R (deg) | z (mm) | Weight (g) |
382295 | 69001A15 | 15 | 47.8 | 60 | 90 | 22.8 | 54.79 |
382296 | 69001A22 | 22 | 63 | 72 | 90 | 35 | 99.00 |
382297 | 69001A28 | 28 | 68.4 | 77 | 90 | 39.4 | 135.78 |
382298 | 69001A35 | 35 | 86.5 | 92.5 | 90 | 56.5 | 197.68 |
382299 | 69001A42 | 42 | 103 | 113 | 90 | 65 | 290.56 |
382300 | 69001A54 | 54 | 125 | 131 | 90 | 81 | 425.46 |
Installation Instructions
- Preparation: Use a roller pipe cutter or a fine-toothed saw ensuring no tarnish. Avoid high cutting speeds to prevent stainless steel sensitisation.
- Deburring: Thoroughly deburr the tube end inside and out, removing all residues.
- Insertion Depth: Mark the insertion depth on the tube or fitting, ensuring accurate installation.
- Sealing Ring Inspection: Ensure the sealing ring is correctly positioned and free from damage.
- Connection: Insert the pipe end into the fitting until it reaches the depth mark, ensuring a secure and proper fit.
For detailed installation instructions, including pressing jaw selection and pressing process, refer to the SANHA installation guide below.