What is a Press Fit Female x Male Threaded Adaptor used for?
The Sanha NiroSan Press Fit Female x Male Threaded Adaptor is designed to facilitate connections between a press-fit system and a female-threaded component. The plain female end is integrated into the press-fit system, while the male threaded end is intended to connect with a female threaded fitting, providing a versatile solution for various piping configurations and transitions.
Key Features
Material Quality: Made from high-grade 1.4404 stainless steel for moulded parts and 1.4408 for threaded parts, ensuring superior corrosion resistance compared to conventional materials.
Durability: Features a long service life, supported by an EPDM sealing ring known for its robustness and reliability.
Certifications: WRAS-tested and certified, ensuring compliance with rigorous health and safety standards.
Temperature and Pressure Ratings: Capable of handling a broad range of operating temperatures (-30 °C to +120 °C) and pressures, varying according to size (up to 40 bar for smaller diameters).
Broad Application Spectrum: Suitable for a multitude of systems, from potable water to technical gases and cooling systems, reflecting its versatility in different industrial and commercial settings.
Certifications: WRAS-certified, ensuring it meets the standards required for safe use in potable water systems.
Available Sizes: 15mm x 1/2", 15mm x 3/4", 22mm x 1/2", 22mm x 3/4", 22mm x 1", 28mm x 3/4", 28mm x 1", 35mm x 1", 35mm x 1 1/4", 42mm x 1 1/2", 54mm x 2"
Pressing Profile: SA, M and V Profile
Materials: 1.4404 (AISI 316L) stainless steel
Sealing Ring: EPDM
Operating Conditions: Varies with diameter - up to 40 bar for ≤22 mm, 25 bar for 28–35 mm, and 16 bar for 42–168.3 mm.
Temperature Range: -30 °C to +120 °C
Range: NiroSan Series 9000
Approvals: BSI / Kitemark & WRAS
Product Code
Sanha Code
DN (mm)
R (inch)
A (mm)
SW (mm)
z (mm)
Weight (g)
382371
69243G1512
15
1/2
46
24
21
54.39
382372
69243G1534
15
3/4
60
30
35
86.19
382373
69243G2212
22
1/2
51
27
23
68.60
382374
69243G2234
22
3/4
51
30
23
90.00
382375
69243G221
22
1
53
36
25
102.90
382376
69243G2834
28
3/4
71.5
30
42.5
94.58
382377
69243G281
28
1
74
36
45
135.08
382378
69243G351
35
1
80
36
50
139.18
382379
69243G35114
35
1 1/4
84
46
54
188.98
382380
69243G42112
42
1 1/2
94
55
56
308.36
382381
69243G542
54
2
106.5
65
62.5
420.46
Installation Instructions
Preparation: Use a roller pipe cutter or a fine-toothed saw ensuring no tarnish. Avoid high cutting speeds to prevent stainless steel sensitisation.
Deburring: Thoroughly deburr the tube end inside and out, removing all residues.
Insertion Depth: Mark the insertion depth on the tube or fitting, ensuring accurate installation.
Sealing Ring Inspection: Ensure the sealing ring is correctly positioned and free from damage.
Connection: Insert the pipe end into the fitting until it reaches the depth mark, ensuring a secure and proper fit.
For detailed installation instructions, including pressing jaw selection and pressing process, refer to the SANHA installation guide below.
Downloads
Sanha NiroSan Stainless Steel Press Fit Installation Guide
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
