Sanha NiroSan Press Fit Female x Male Threaded Adaptor

The Sanha NiroSan Press Fit Female x Male Threaded Adaptor is designed to facilitate connections between a press-fit system and a female-threaded component. The plain female end is integrated into the press-fit system, while the male threaded end is intended to connect with a female threaded fitting, providing a versatile solution for various piping configurations and transitions.

• Material Quality: Made from high-grade 1.4404 stainless steel for moulded parts and 1.4408 for threaded parts, ensuring superior corrosion resistance compared to conventional materials.
• Durability: Features a long service life, supported by an EPDM sealing ring known for its robustness and reliability.
• Certifications: WRAS-tested and certified, ensuring compliance with rigorous health and safety standards.
• Temperature and Pressure Ratings: Capable of handling a broad range of operating temperatures (-30 °C to +120 °C) and pressures, varying according to size (up to 40 bar for smaller diameters).
• Broad Application Spectrum: Suitable for a multitude of systems, from potable water to technical gases and cooling systems, reflecting its versatility in different industrial and commercial settings.
• Certifications: WRAS-certified, ensuring it meets the standards required for safe use in potable water systems.

• Product Codes: 69243G1512, 69243G1534, 69243G2212, 69243G2234, 69243G221, 69243G2834, 69243G281, 69243G351, 69243G35114, 69243G42112, 69243G542
• Available Sizes: 15mm x 1/2", 15mm x 3/4", 22mm x 1/2", 22mm x 3/4", 22mm x 1", 28mm x 3/4", 28mm x 1", 35mm x 1", 35mm x 1 1/4", 42mm x 1 1/2", 54mm x 2"
• Pressing Profile: SA, M and V Profile
• Materials: 1.4404 (AISI 316L) stainless steel
• Sealing Ring: EPDM
• Operating Conditions: Varies with diameter - up to 40 bar for ≤22 mm, 25 bar for 28–35 mm, and 16 bar for 42–168.3 mm.
• Temperature Range: -30 °C to +120 °C
• Range: NiroSan Series 9000
• Approvals: BSI / Kitemark & WRAS

1. Preparation: Use a roller pipe cutter or a fine-toothed saw ensuring no tarnish. Avoid high cutting speeds to prevent stainless steel sensitisation.
2. Deburring: Thoroughly deburr the tube end inside and out, removing all residues.
3. Insertion Depth: Mark the insertion depth on the tube or fitting, ensuring accurate installation.
4. Sealing Ring Inspection: Ensure the sealing ring is correctly positioned and free from damage.
5. Connection: Insert the pipe end into the fitting until it reaches the depth mark, ensuring a secure and proper fit.

For detailed installation instructions, including pressing jaw selection and pressing process, refer to the SANHA installation guide below.