Login / Register
Sanha NiroSan Press Fit Female Reducing Tee 90
Useful Information
What is a Press Fit Female Reducing Tee 90° used for?
The Sanha NiroSan Press Fit Female Reducing Tee 90° is a versatile fitting designed to branch off a press-fit piping system, allowing for integration of pipes of different diameters at a 90-degree angle. This reducing tee is essential for systems requiring a junction to divert flow or integrate auxiliary lines with varying sizes, ensuring a cohesive and efficient piping network.
Key Features
- Material Quality: Made from high-grade 1.4404 stainless steel for moulded parts and 1.4408 for threaded parts, ensuring superior corrosion resistance compared to conventional materials.
- Durability: Features a long service life, supported by an EPDM sealing ring known for its robustness and reliability.
- Certifications: WRAS-tested and certified, ensuring compliance with rigorous health and safety standards.
- Temperature and Pressure Ratings: Capable of handling a broad range of operating temperatures (-30 °C to +120 °C) and pressures, varying according to size (up to 40 bar for smaller diameters).
- Broad Application Spectrum: Suitable for a multitude of systems, from potable water to technical gases and cooling systems, reflecting its versatility in different industrial and commercial settings.
- Certifications: WRAS-certified, ensuring it meets the standards required for safe use in potable water systems.
Specifications
- Product Codes: 69130221522, 69130281528, 69130282228, 69130352235, 69130352835, 69130422242, 69130422842, 69130423542, 69130542254, 69130542854, 69130543554, 69130544254
- Pressing Profile: SA, M and V Profile
- Materials: 1.4404 (AISI 316L) stainless steel
- Sealing Ring: EPDM
- Operating Conditions: Varies with diameter - up to 40 bar for ≤22 mm, 25 bar for 28–35 mm, and 16 bar for 42–168.3 mm.
- Temperature Range: -30 °C to +120 °C
- Range: NiroSan Series 9000
- Approvals: BSI / Kitemark & WRAS
Product Code | Sanha Code | d1 (mm) | d2 (mm) | d3 (mm) | H (mm) | L1 (mm) | L2 (mm) | z1 (mm) | z2 (mm) | z3 (mm) | ||||||
382340 | 69130221522 | 22 | 15 | 22 | 51 | 54 | 54 | 26 | 26 | 26 | ||||||
382341 | 69130281528 | 28 | 15 | 28 | 55 | 60 | 60 | 31 | 30 | 31 | ||||||
382342 | 69130282228 | 28 | 22 | 28 | 57 | 60 | 60 | 31 | 29 | 31 | ||||||
382343 | 69130352235 | 35 | 22 | 35 | 60 | 65 | 65 | 35 | 32 | 35 | ||||||
382344 | 69130352835 | 35 | 28 | 35 | 62 | 65 | 65 | 35 | 33 | 35 | ||||||
382345 | 69130422242 | 42 | 22 | 42 | 63 | 77 | 77 | 39 | 35 | 39 | ||||||
382346 | 69130422842 | 42 | 28 | 42 | 65 | 77 | 77 | 39 | 36 | 39 | ||||||
382347 | 69130423542 | 42 | 35 | 42 | 67 | 77 | 77 | 39 | 37 | 39 | ||||||
382348 | 69130542254 | 54 | 22 | 54 | 69 | 89 | 89 | 45 | 41 | 45 | ||||||
382349 | 69130542854 | 54 | 28 | 54 | 70 | 89 | 89 | 45 | 41 | 45 | ||||||
382350 | 69130543554 | 54 | 35 | 54 | 73 | 89 | 89 | 45 | 43 | 45 | ||||||
382351 | 69130544254 | 54 | 42 | 54 | 81 | 89 | 89 | 45 | 43 | 45 |
Installation Instructions
- Preparation: Use a roller pipe cutter or a fine-toothed saw ensuring no tarnish. Avoid high cutting speeds to prevent stainless steel sensitisation.
- Deburring: Thoroughly deburr the tube end inside and out, removing all residues.
- Insertion Depth: Mark the insertion depth on the tube or fitting, ensuring accurate installation.
- Sealing Ring Inspection: Ensure the sealing ring is correctly positioned and free from damage.
- Connection: Insert the pipe end into the fitting until it reaches the depth mark, ensuring a secure and proper fit.
For detailed installation instructions, including pressing jaw selection and pressing process, refer to the SANHA installation guide below.