Login / Register
Plasson Single Meter Connection Point
Useful Information
- Monobloc design for quick and easy installation
- Quarter turn high flow mains stop valve
- 1 1/2" Class D concentric meter connection
- Approved double check valve built in
- Built in drain point
- NBR & EPDM sealing for water tight integrity
- Kiwa UK Regulation 4 (KUKreg4) approved
- Maximum Operating Pressure: 16 bar
- Maximum Operating Temperature: 23°C
| Product Code | Length (mm) | Height (mm) | Width (mm) |
| 405079 | 280 | 125 | 80 |
| 405080 | 280 | 125 | 80 |
| *405081 | 280 | 125 | 80 |
| 405082 | 275 | 125 | 80 |
Note
The MCP unit has 'O' rings on the male threads that seal only the special Plasson mechanical and pushfit fittings supplied with the MCP, these require no additional sealing materials which could compromise the 'O' ring seal.
To install the Plasson fitting onto the thread, engage the threads and screw the fitting on firmly by hand. The 1" x 3/4" meter union, seals with flat washers supplied, wrench tighten.
The meter seat plug is for initial testing but is also suitable for long term use if required. It is 'O' ring sealed, if removed to fit a meter, please also remove the seal and use the seals supplied with the meter. It is a full-flow plug.
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
