Login / Register
MDPE Plastic Wall Plate Elbow
Useful Information
Our Wall Plate Elbows are available in sizes from 20mm x 1/2" to 25mm x 3/4"
These Wall Plate Elbows allow connections from MDPE pipe to threaded fittings like bib taps.
The MDPE pipes to be joined must be of the same diameter.
To maintain a rigid and reliable joint connection, it is highly advised that pipe liners (also known as stiffeners or inserts) are also used where MDPE is connected.
Body Material | High Impact Polypropylene |
Nut Material | High Impact Polypropylene |
Thrust Ring | High Impact Polypropylene |
Clinching Ring Material | Acetal Resin |
Gasket Material | Black Nitrile Rubber (NBR) |
Guard Ring | Stainless Steel (AISI 430) |
Operating Pressure Rating | 16 bar |
Operating Temperature | -10°C to +60°C |
Product Code | Size | D (mm) | L (mm) | H (mm) | H1 (mm) | B (mm) | E (mm) | C (mm) |
402739 | 20mm x 1/2" | 47 | 68.5 | 101 | 54 | 36 | 32 | 5 |
402740 | 25mm x 1/2" | 54 | 75 | 112 | 58 | 39.5 | 35 | 5 |
402741 | 25mm x 3/4" | 54 | 75 | 112 | 58 | 39.5 | 35 | 5 |
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.