FloPlast Solvent Weld Waste Bend 90 Black
Technical Specification
- Material: Acrylonitrile-Butadiene-Styrene (ABS)
- Available Sizes: 32mm, 40mm, 50mm
- Angle: 90°
- Standards Compliance: BS EN 1455-1:2000, BS 5255:1989
- Application: Internal and external waste systems
Description
The FloPlast Solvent Weld Waste Bend 90° in black is a durable and cost-effective solution for creating sharp 90° bends in waste pipe systems. Constructed from high-quality Acrylonitrile-Butadiene-Styrene (ABS), it is lightweight, easy to handle, and built to last. Designed to connect to solvent weld waste pipes securely, it ensures leak-proof and reliable performance for both internal and external waste systems. Available in 32mm, 40mm, and 50mm sizes, this fitting is versatile enough to meet a wide range of installation requirements. Compliant with BS EN 1455-1:2000 and BS 5255:1989 standards, it delivers safety, durability, and efficiency.
Key Features
- Durable ABS Construction: High-quality material ensures excellent resistance to corrosion, impact, and wear.
- Lightweight and Strong: Combines ease of handling with robust performance.
- Secure Solvent Weld System: Provides a leak-proof connection for long-term reliability.
- Versatile Sizing: Available in 32mm, 40mm, and 50mm to suit various system configurations.
- Sharp 90° Bend: Creates efficient pipe direction changes with minimal flow disruption.
- Standards Compliance: Fully meets BS EN 1455-1:2000 and BS 5255:1989 standards for quality and safety.
- External Use Ready: Can be installed outdoors when protected against UV light with exterior gloss paint.
| SKU | Size (mm) | A (mm) | B (mm) | C (mm) | D (mm) |
| 488415 | 32 | 67 | 26 | 67 | 26 |
| 488416 | 40 | 76 | 28 | 76 | 28 |
| 488417 | 50 | 98 | 33 | 98 | 33 |
Installation Guide
- Cut the pipe squarely, remove swarf, and clean both surfaces of the joint with cleaning fluid.
- Apply solvent cement evenly to both surfaces and insert the pipe fully into the socket depth.
- Remove excess cement and allow five minutes to set before handling and twelve hours before testing the system.
- For vertical installations, fix brackets at 1.2m centres, and for horizontal installations, fix brackets at 0.5m (32mm/40mm) or 0.6m (50mm) centres.
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
