Login / Register
Durapipe ABS Pipe Class T
Useful Information
Key Features / Tech Specs & Dimensions:
- Material: acrylonitrile butadiene styrene
- FDA and DWI approved
- Temperature range - 40°C to 60°C, dependent on pressure
- Pressure rated to 12 bar
- Suitable for the conveyance of chilled water and water demineralisation processes
- Non-toxic
- Tested by WRc
| ABS Pipe Dimensions - Class T | |||
| Nominal Size (inch) | Average Outside Diameter (mm) | Average Bore Inside Diameter (mm) | Average Wall Thickness (mm) |
| ⅜ | 17.1 | 10.2 | 3.5 |
| ½ | 21.4 | 14.2 | 3.6 |
| ¾ | 26.7 | 19.6 | 3.6 |
| 1 | 33.6 | 24.9 | 4.3 |
| 1¼ | 42.2 | 31.7 | 5.3 |
| 1½ | 48.3 | 36.3 | 6.0 |
| 2 | 60.3 | 46.0 | 7.2 |
These ABS pipes are all British Standard size. This standard is based on the nominal bore of the pipes across the full range and not the diameter. For clarification, please see the table above. If in doubt, please ring us to avoid ordering the wrong pipework.
Approvals:
 |
 |
Useful Info:
Our ABS pipe, when selected with our ABS fittings and valves, completes a fully matched system.
If you require any further information, our excellent customer service team is here to help so please call us on 01794 835835.
